Use the history link in the main or asset menu to display the history page. Note that history is only available if enabled by your administrator.

The history module will pop-up and show the following options :

  • Asset – Select the asset or group of assets to include in the history report.
  • Scan for assets – Search history for the selected range to identify which assets were active. This will take into account any limitations set below.
  • Report Type – Choose format of report. See following sections.
  • Search time interval – Report will be based on selected time period.
  • Find 100 most recent – Report will search for 100 most recent records.
  • Time shortcuts – Shortcuts to popular time intervals (when using a time interval).
  • Start/End Date – Choose dates for report.
  • Specify time – When selected, the exact time for report start and end points can be entered. Otherwise the beginning of the start date and end of end date wll be used.
  • Limit search area – Optionally select an area to search for activity. This area can be the current map view, or a predefined geofence. Note that records with no positions will be excluded from the report.
  • Limit search events – Optionally select an event type. Only events of this type will be included in the report
  • All/Events/Messages – Choose what types of reports to include.
  • Stopped Speed/Time – Parameters for detecting trip stop locations. These are used if the asset has not reported stop events.

Use this report to quickly access asset history.

The list on the left shows historical records with newest at the top, while the map on the right plots the record locations. Selecting a point in the list/map will also highlight the point on the map/list. The map and table can be toggled on or off using the display setting. Information about the selected point is shown in the details section below the list.

  • Replay – Select this option to automatically move through the list and show the current location on the map. The Interval setting controls the update speed.
  • Single Icon – When selected, the map will only show the selected point.
  • Icons – Choose the icon style. Heading shows arrows indicating direction of asset motion. Speed/altitude change colour as speed or altitude values change. Network icons show which network was used to transmit the data. Event icons indicate events/messages. The sequence option causes icon colour to change as report time increases.
  • Map labels – Show or hide labels on map icons.

Click on the “Show Column List” link to choose what data to include in the data list. Select the desired column names, then click Update List to make the changes.

The printer friendly option creates a simple layout suitable for printing.

The table report produces a comma separated variable (CSV) text file, suitable for loading into Excel or other spreadsheet programs.

Asset Asset description
ID Asset ID
RX_Time Time packet was received
Network Network used to send packet
GPS_Time Time packet was generated by asset
GPS_Valid Indicates whether asset had good GPS signal
Latitude/Longitude GPS latitude and longitude (decimal degrees)
Speed_KPH Asset speed (km/h)
Heading_Deg GPS heading (degrees)
Event Description of event that caused this record
Data Extra data specific to this event
Altitude_Metres GPS altitude (metres)
Battery Asset battery level
Cell_ID Cell ID
Cell_LAC Cell LAC
Cell_RSSI_dBm Cell RSSI (dBm)
Cell_Advance_Metres Distance from cell site (metres)
IGN IGN pin state
Input X Digital input states
Output X Digital output states
Motion Motion state
Temperature (C) Asset temperature (degrees C)
Sensor X Sensor states
Message_ID ID used to track messages
Batt_Percent Battery percentage
Host Description of user who sent this record, if outgoing to asset
Job_ID Job ID
Job_State Job state
Address Address of this location if available from server
Geofence Name of geofence this report is located inside
Priority Message priority (1=high priority)
  • platform/history.txt
  • Last modified: 2023/03/31 05:37
  • by petropal